Miele KS 28463 D ed/cs Скачать руководство пользователя

Страница: 71 / 88

Installation

– Fitting the soft-close mechanism



Insert the soft-close mechanism



on the door hinge side (at an angle
initially) until it clicks into position.



Then press the other end of the soft-
close mechanism into the opening.



Secure the soft-close mechanism
with the screw





Push the hinged arm



into the

opening on the door hinge.



Insert the pin



into the door hinge

from above. Turn this with a
screwdriver (by approx. ¼ turn) until
both lugs on the pin click into
position correctly in the grooves.



Pull out the red safety device



Useful tip:

Keep the red safety device

in case you want to change the door
hinging again at a later date.



Fit the cover



on the door hinge.



Fit the panel



so that it clicks into

position.



Slide on the outer cover





Close the appliance door.

Содержание KS 28463 D ed/cs

























































































Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28463 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды