Miele KS 28463 D ed/cs Скачать руководство пользователя страница 72

Страница: 72 / 88

Installation



Two people are required for

installing the appliance.



The appliance must be empty to

be installed.



Move the appliance carefully on

floors that are sensitive to scratching
to prevent damage.

For easier installation there are
transport handles on the back at the
top and transport wheels underneath
the appliance.



Prepare the appliance for installation
as close as possible to its intended
installation location.



Connect the appliance to the
electricity supply as described in
“Electrical connection”.



Move the appliance carefully to its
intended installation location.



Position the appliance with the wall
spacers (if used) or the back close to
the wall.

Aligning the appliance



To align the appliance, adjust the
front feet using the spanner supplied.

Содержание KS 28463 D ed/cs

























































































Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28463 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды