Miele KS 28463 D ed/cs Скачать руководство пользователя

Страница: 21 / 88

Switching on and off

Touch display

The touch display can be scratched
by pointed or sharp objects, e.g.
pens.
Only touch the display with your
fingers.

If your fingers are cold, the touch
display may not react.

Switching the appliance on



Standby



Touch



briefly.

The welcome message

Miele - Willkommen

will appear in the

display for approx. 3 seconds.

If this does not happen and



appears in the display, the safety lock
is activated (see “Selecting further
settings” - “Activating or deactivating
the safety lock” - “Deactivating the
safety lock temporarily”).



°C

Start screen

The display changes to the start screen.

The interior lighting comes on. The
appliance is now switched on and will
start to cool. It will gradually reach the
preset temperature of 5 °C.

Start screen



°C

The start screen is the screen from
which all settings can be selected.

The display is divided into two fields for
this purpose:

The temperature display is on the
left-hand side.

Here you can set or change the
temperature as well as select the
SuperCool



function (see “Using

SuperCool”).

Settings mode



is on the right-

hand side.

Touch the



symbol to access Settings

mode. Here further settings can be
selected (see “Selecting further
settings”).

Содержание KS 28463 D ed/cs

























































































Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28463 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды