Miele KS 28463 D ed/cs, Инструкции по эксплуатации и монтажу

Страница: 69 / 88

Installation
69
Fitting the supplied wall
spacers
The wall spacers supplied must be
used in order to achieve the stated
energy consumption values and to
prevent the build-up of condensation
at high ambient temperatures.
Appliance depth is increased by
approx. 15 mm with the wall spacers
fitted. If the wall spacers are not used,
the functionality of the appliance is not
affected. However, energy
consumption is slightly increased with
less distance between the appliance
and the wall.

Fit the wall spacers onto the back of
the refrigeration appliance on the
bottom left and right.
Limiting the opening angle of
the door
The door hinges are set at the factory to
enable the door to be opened up to
115°. If the appliance door hits an
adjacent wall when opened, for
example, the opening angle can be
limited to approx. 90°:
The door opening angle limiter should
be fitted before the refrigeration
appliance is installed.
Fitting the door opening angle limiter

Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
switch off the mains circuit breaker.
– Removing the soft-close
mechanism

Open the appliance door.
 Slide off the right outer cover  .