Miele KS 28463 D ed/cs Скачать руководство пользователя

Страница: 32 / 88

Selecting further settings

– When the minute minder duration
has elapsed

An audible signal will sound and



will

flash.



Touch the display.

The start screen appears.

– Altering the minute minder



Open the appliance door.



and the minute minder countdown

appear in the display for approx.
3 seconds.



During this time, touch the minute
minder countdown in the display.



Touch



to alter the minute minder

duration. Proceed exactly as for
setting the minute minder duration
(see “Setting the minute minder”).

– Cancelling the minute minder



Open the appliance door.



and the minute minder countdown

appear in the display for approx.
3 seconds.



During this time, touch the minute
minder countdown in the display.



Touch



to delete the set minute

minder.

The start screen appears.

You can also alter or cancel a set
minute minder duration in Settings
mode.

Activating or deactivating the safety
lock





The safety lock can be activated to
secure against unintentional:

– switching off

– temperature adjustments

– selection of SuperCool

– adjustment of settings (only switching

off the safety lock is possible).

The safety lock prevents the appliance
being used without your knowledge, for
example by children.

The safety lock will remain activated
following an interruption to the power
supply, if previously switched on.

– Deactivating the safety lock



temporarily



Touch the display.



appears.



Touch and hold



for approx. 6

seconds.

You can now select further settings.
When the appliance door is closed, the
safety lock is switched on again.

Содержание KS 28463 D ed/cs

























































































Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28463 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28463 D ed/cs

Отзывы:

Похожие инструкции для KS 28463 D ed/cs

Бренды по названию

Популярные бренды