Miele KS 28423 D ed/cs страница 70 Скачать руководство пользователя

Страница: 70 / 88

Installation

I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-

Installation



Two people are required for in-

stalling the appliance.



The appliance must be empty

when it is installed.



Move the appliance carefully on

floors that are sensitive to scratching
to prevent damage.

For easier installation there are trans-
port handles on the back at the top
and transport wheels underneath the
appliance.



Prepare the appliance for installation
as close as possible to its intended
installation location.



Connect the appliance to the electri-
city supply as described in “Electrical
connection”.



Move the appliance carefully to its in-
tended installation location.



Position the appliance with the wall
spacers (if used) or the back close to
the wall.



Risk of damage to the appliance

door.
The appliance doors could hit the
wall of the room resulting in damage
to the doors.
Protect the glass doors by fitting a
felt stopper, for example, to the wall
of the room.

Aligning the appliance



To align the appliance, adjust the
front feet using the spanner supplied

Levelling the appliance door



Ensure

that you unscrew the ad-

justable foot



from the lower hinge

plate with the enclosed spanner until
it sits on the floor. Then unscrew the
foot by a further ¼ turn.

Содержание KS 28423 D ed/cs

























































































Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28423 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды