manualshive.com logo in svg

Miele KS 28423 D ed/cs, Инструкции по эксплуатации и монтажу, Страница: 31 / 88

Поделиться
Скачать
Miele KS 28423 D ed/cs Скачать руководство пользователя страница 31

Selecting further settings

31

Activating or deactivating the lock 

/

The safety lock can be activated to pre-
vent:

– the appliance being switched off by

mistake,

– the temperature being changed by

mistake,

– Super cool being selected by mis-

take,

– settings being adjusted by mistake (it

is only possible to deactivate the
safety lock).

This prevents the appliance being
switched off or settings adjusted
without your knowledge; for example,
by children.

The safety lock will remain activated
following an interruption to the power
supply, if previously switched on.

– Deactivating the safety lock 

 tem-

porarily

Touch the display.

 appears.

Touch 

 for approx. 6 seconds.

You can now select other settings. If the
appliance door is closed again, the
safety lock is activated again.

– Deactivating the safety lock 

Touch the display.

 appears.

Touch 

 for approx. 6 seconds.

The start screen will appear.

Touch 

.

Select 

.

 lights up orange.

Touch 

.

 appears in the display. The safety

lock is deactivated.

Switching the refrigeration appliance
off 

The whole refrigeration appliance can
be switched off with this function.

The temperature display goes out and

 lights up.

The interior lighting goes out and cool-
ing is turned off.

 will go out after approx. 10 minutes

and the display will turn dark (Energy-
saving mode).

Содержание KS 28423 D ed/cs

























































































Отзывы:

Нет отзывов