Miele KS 28423 D ed/cs страница 56 Скачать руководство пользователя

Страница: 56 / 88

Problem solving guide

Message

Cause and remedy





lights up yellow in

the display and an
alarm also sounds.

The

door alarm

has been activated (also see “Door

alarm”).



Touch





in the display.

The alarm message is confirmed and the warning
tone stops.
The current temperature will appear in the display
again.



Close the appliance door.

The alarm will stop.



lights up red in the

display, a fault code F
with numbers appears
and an alarm also
sounds.

There is a fault.



To switch the alarm off touch



in the display.



Contact Miele.

To report the fault you need the fault code and also
the model number and serial number of your appli-
ance. You can access these in the display.



To do this touch



in the display.

The appliance data required will be shown in the dis-
play.

Confirm with

to exit the information display and

the fault code will be shown again in the display.

The appliance can be switched off directly from the
fault code display.



Touch



There is an

appliance fault

: this display always has

priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.

Содержание KS 28423 D ed/cs

























































































Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28423 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды