Miele KS 28423 D ed/cs страница 55 Скачать руководство пользователя

Страница: 55 / 88

Problem solving guide

Display warnings

Message

Cause and remedy



lights up on the dis-

play, the appliance does
not get cold even
though the controls and
the interior lighting are
working.

Demo mode

is switched on.



Switch Demo mode off (see “Selecting further set-
tings – Switching Demo mode off”).

Nothing is visible on the
display. The display is
completely blank.

Energy-saving mode

is switched on. If the appliance

has not been operated for a while (approx.
10 minutes), the display is switched off.



Touch the display.

The display shows the most recent indication.

Sabbath mode

is switched on. The interior lighting is

switched off and the appliance is cooling down.



Touch the display.



will then light up white in the display (see “Selecting

further settings – Switching Sabbath mode on/off”).



is lit up in the display

and the appliance can-
not be used.

The

safety lock

has been activated.



Deactivate the safety lock temporarily or switch it
off completely (see “Selecting further settings -
Activating or deactivating the safety lock”).



lights up in the refri-

gerator section temper-
ature display and an
audible tone sounds.

The

Replace charcoal filter reminder

setting has

been activated. This is the reminder to change the
Active AirClean charcoal filters.



Confirm that the filters have been replaced by
touching



in the display, and replace the char-

coal filters in the holder (see (“Cleaning and care” -
“Replacing the charcoal filters”).



lights up in the dis-

play and an audible
tone also sounds.

The

Clean ventilation grille reminder

setting has

been activated. This is the prompt to clean the ventil-
ation grille.



Confirm the message by touching



in the display

and clean the ventilation grille (see “Cleaning and
care - Cleaning the ventilation grille”).

Содержание KS 28423 D ed/cs

























































































Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28423 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды