Miele KS 28423 D ed/cs страница 64 Скачать руководство пользователя

Страница: 64 / 88

Installation

I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-

Do not connect the refrigeration appli-
ance to a stand-alone inverter such as
those used with an autonomous energy
source, e.g.

solar power

When the refrigeration appliance is
switched on, power surges could result
in a safety switch-off. This could dam-
age the electronic module. The refriger-
ation appliance must not be used with
so-called

energy-saving devices

either. These reduce the amount of en-
ergy supplied to the appliance, causing
it to overheat.

Connecting the appliance



Insert the plug connector into the
socket at the back of the refrigeration
appliance.

Make sure that the plug connector has
clicked into position correctly.



Insert the mains plug into the mains
socket and switch on.

The appliance is now connected to the
electricity supply:



will appear on the display.

Follow the steps described in “Switch-
ing on and off – Switching on”.

Содержание KS 28423 D ed/cs

























































































Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды

Miele KS 28423 D ed/cs, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KS 28423 D ed/cs

Отзывы:

Похожие инструкции для KS 28423 D ed/cs

Бренды по названию

Популярные бренды