Miele KS 28423 D ed/cs страница 26 Скачать руководство пользователя | Manualshive

Страница: 26 / 88

background image

Door alarm

26

Door alarm

The refrigeration appliance is fitted with
a warning system to avoid increased
energy consumption and prevent stored
food becoming warm if the door is left
open.

If the appliance door is left open for a
longer period of time,





will light up

yellow in the temperature display. An
audible alarm will also sound.

The amount of time until the door alarm
is triggered depends on the setting se-
lected (factory default setting =
1 minute) and can be changed (see
“Selecting further settings – Changing
the time until the door alarm is
triggered”). However, the door alarm
can also be turned off (see “Selecting
further settings – Setting the volume/
Switching alarms and audible tones on/
off”).

The alarm will stop and





will go out

in the display as soon as the door is
closed.

The door alarm is only displayed on
the start screen.

The door alarm is automatically
supressed when you are in Settings
mode. No symbol will be displayed
and no alarm will sound.

If an alarm does not sound even
though the door is open, the alarm has
been switched off in Settings mode
(see “Selecting further settings – Set-
ting the volume/Switching alarms and
audible tones on/off”).

Switching the door alarm off early

If the noise disturbs you, you can
switch the alarm off if you wish.



Touch





.

The current temperature is shown in the
display. The alarm will stop.

«
...
24
25
26
27
28
...
»

Содержание KS 28423 D ed/cs

























































































Отзывы:

Нет отзывов

Похожие инструкции для KS 28423 D ed/cs

Бренд: Magic Chef Страницы: 5

Бренд: Zanussi Страницы: 16

Бренд: Elkay Страницы: 2

Бренд: Saivod Страницы: 36

Бренд: GE Страницы: 52

Бренд: KBS Страницы: 69

Бренд: NEFF Страницы: 30

Бренд: Jacky's Страницы: 56

Бренд: Amana Страницы: 14

Бренд: Jenn-Air Страницы: 80

Бренд: NEFF Страницы: 40

Бренд: Zokop Страницы: 9

Бренд: VALPRO Страницы: 31

Бренд: Randell Страницы: 4

Бренд: TCL Страницы: 181

Бренд: Signature Страницы: 70

REFRIGERATOR / FREEZER COMBO HRF-6631RG

Бренд: Haier Страницы: 44

Бренд: Haier Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды