Miele KFN 9855 iDE Скачать руководство пользователя

Страница: 23 / 96

For best results, switch on Super
Freeze before putting fresh food into
the freezer.

Fresh food will be frozen quickly, so
that the nutritional value, vitamin
content, appearance and taste are
maintained.

Exceptions:

– if you are loading frozen food into the

freezer.

– if you are not loading more than 2 kg

(4-1/2 lbs) fresh food into the freezer
per day.

Switching Super Freeze on

Super Freeze should be switched on

hours before you place

fresh food in

the freezer. However, if you want

maximum freezing performance ,
Super Freeze should be switched on
24 hours beforehand!

Touch the button for switching Super
Freeze on and off so that the

symbol to the right of the display
comes on.

The temperature in the freezer section
now begins to fall, with maximum
cooling performance.

Switching Super Freeze off

Super Freeze switches off automatically
after approx. 30 - 65 hours. The length
of time required until it switches off
depends on the amount of fresh food
added.

goes out, and the appliance

continues running with normal cooling
performance.

To save energy, you can switch off
Super Freeze yourself once the freezer
reaches a

constant

temperature of at

least -18°C (0°F). Therefore you should
check the temperature in the freezer
section.

Touch the button for switching Super
Freeze on and off so that the

symbol to the right of the display
goes out.

The appliance now continues running
with normal cooling performance.

Using Super Freeze

Содержание KFN 9855 iDE

































































































Результаты поиска

Содержание KFN 9855 iDE

Отзывы:

Похожие инструкции для KFN 9855 iDE

Бренды по названию

Популярные бренды

Miele KFN 9855 iDE, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KFN 9855 iDE

Отзывы:

Похожие инструкции для KFN 9855 iDE

Бренды по названию

Популярные бренды