Miele KFN 9855 iDE страница 11 Скачать руководство пользователя | Manualshive

Страница: 11 / 96

background image

~

Multiple power outlets or extension cords are not safe (risk of fire).

Do not use them to connect the appliance to the electrical power
supply.

~

Do not use the appliance in areas where there may be moisture

or splashing water (e.g. car sheds, laundry rooms, etc.)
Moisture can reach the electrical components and cause a short
circuit.

~

This appliance is not to be used in mobile locations such as

ships.

~

A damaged appliance can be dangerous. Before installing the

appliance, check for visible damage. Do not operate a damaged
appliance.

~

To ensure safe operation, use the appliance only when it is

installed.

~

The appliance must be isolated from the electrical power supply

during installation, maintenance and repair work or work on the
water supply. The appliance is only completely disconnected from
the electricity supply when:

– the respective circuit breaker at the electrical service panel is

tripped,

– the respective fuse is removed, or

– the power cord is pulled.

Pull on the plug and not on the cord when removing it from the
outlet.

~

Improper installation, repair and maintenance work or work on the

water supply can be dangerous for the user of the appliance.
Installation, repair and maintenance work or repairs on the ice cube
maker should only be performed by a Miele authorized technician.

~

Repairs not performed by a Miele authorized service technician

will void the warranty.

Safety Instructions and Warnings

11

«
...
9
10
11
12
13
...
»

Содержание KFN 9855 iDE

































































































Отзывы:

Нет отзывов

Похожие инструкции для KFN 9855 iDE

HB21FC45N Series

Бренд: Haier Страницы: 108

Бренд: Jenn-Air Страницы: 232

Бренд: CDA Страницы: 20

Бренд: Infiniton Страницы: 30

Бренд: Midea Страницы: 68

Бренд: Novamatic Страницы: 44

Бренд: Smeg Страницы: 22

Бренд: Randell Страницы: 2

Бренд: VOX electronics Страницы: 61

Бренд: NewAir Страницы: 13

Бренд: Lamona Страницы: 24

Бренд: HAEGER Страницы: 64

Бренд: nardi Страницы: 10

Бренд: U-Line Страницы: 14

Бренд: Haier Страницы: 22

Бренд: Haier Страницы: 340

Бренд: Haier Страницы: 40

HRF-663ISB2 Series

Бренд: Haier Страницы: 212

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды