Miele KFN 9855 iDE Скачать руководство пользователя | Manualshive

Страница: 17 / 96

background image

Before first use

It is very important to let the
appliance stand for 30 to 60 minutes
after trasport before you plug it in for
the first time. Failure to do so can
prevent the appliance from
functioning properly!

Packaging material

^

Remove all packaging material from
the inside of the appliance.

Protective film

The stainless steel trim and covers are
covered with a film to protect them
during transportation.

^

Pull the protective film off the
stainless steel surfaces.

Care and cleaning

^

Immediately after pulling the film off,
wipe the stainless steel surfaces with
the Miele stainless steel conditioner
provided.

Important! Each application of the
stainless steel conditioner forms a
durable protective film that is stain-
and water-repellent!

^

Clean the inside of the appliance and
the accessories (see "Cleaning and
care").

Operating the appliance

A light touch of the finger on the sensor
buttons is all that is required to operate
this appliance.

After transporting the appliance, let
it stand for approx. 1/2 to 1 hour
before plugging it in. This is
necessary to ensure that the
appliance functions correctly!

Turning the appliance on

The refrigerator and freezer sections
can be turned on and off separately so
that you can use one section only.
This is useful when you only need to
have the freezer section running (when
going on holiday, for example.)

^

Touch the button for switching the
refrigerator and/or the freezer section
on and off so that the respective
temperature is displayed.

The appliance starts cooling.

The top temperature display shows the
temperature in the refrigerator section,
the bottom temperature is that in the
freezer section.
If the temperature in the freezer section
is above 0°C (32°F), only dashes are
displayed.

Turning the Appliance On and Off

17

«
...
15
16
17
18
19
...
»

Содержание KFN 9855 iDE

































































































Отзывы:

Нет отзывов

Похожие инструкции для KFN 9855 iDE

DFF070B1BSLDB-6

Бренд: Danby Страницы: 28

Бренд: NewAir Страницы: 14

Бренд: Smeg Страницы: 24

Бренд: Sunbeam Страницы: 20

Бренд: Follett Страницы: 16

Бренд: GE Страницы: 144

Refrigerators and Freezers

Бренд: Continental Scientific Страницы: 36

Бренд: Cylinda Страницы: 116

Бренд: GE Страницы: 132

Бренд: Adler Europe Страницы: 40

Бренд: Adler Europe Страницы: 72

Бренд: AEG Страницы: 20

Бренд: AEG Страницы: 12

Бренд: AEG Страницы: 52

Бренд: AEG Страницы: 60

Бренд: AEG Страницы: 24

Бренд: AEG Страницы: 28

Бренд: AEG Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды