Reattaching the door handles:
It is critical that you follow the
instructions below for attaching the
door handle. An improperly
mounted handle will damage the
door seal.
^
First, loosely screw the door handle
onto the opposite side using the two
front screws
b
.
The mounting plate
c
must be
positioned on the side of the door such
that, when the door is
closed
, the
mounting plate is flush with the side
wall of the appliance.
If this is not the case,
^
Turn the two pre-mounted set screws
a
with a hex key until the mounting
plate
c
is positioned at the correct
angle.
^
Firmly tighten all 4 screws
b
.
^
From the appliance side, slide the
sidebar
d
into the guide on the
mounting plate until it clicks into
place.
Make sure that the sidebar
d
does
not come into contact with the door
seal when the door is opened. Over
time, this will damage the seal.
If the sidebar does touch the seal:
^
Realign the mounting plate
c
using
the set screws
a
until the mounting
plate and the sidebar
d
are at the
correct angle and the sidebar no
longer touches the seal when the
door is opened.
Reversing the door hinging
57
Содержание KFN 12823 SD ed
