DynaCool
m
When the Dynamic Cooling (DynaCool)
function is not switched on, the natural
circulation of air in the appliance will
create different temperature zones in
the refrigerator since the cold, heavy air
will sink to the lowest region. You
should bear this in mind when placing
food in the refrigerator (see "Using the
refrigerator efficiently").
However, when placing a large amount
of food in the refrigerator at the same
time (e.g. for a party), it is a good idea
to switch on Dynamic Cooling. This way
you can distribute the temperature
inside the refrigerator to all areas more
evenly so that all the food will be chilled
to roughly the same extent.
The temperature can still be set as
usual with the temperature control.
Dynamic Cooling should also be
switched on when:
– The room temperature is high (above
approx. 30°C [86°F]), and
– The humidity in the room is high.
Switching on Dynamic Cooling
^
Press the Dynamic Cooling button
until the indicator light comes on.
Be sure that the fan slots in the back
wall of the appliance are not
blocked. Otherwise, an even
temperature distribution can no
longer be ensured.
Switching off Dynamic Cooling
Because Dynamic Cooling requires
more energy, you should switch it off
under normal conditions.
^
Press the Dynamic Cooling button
m
until the indicator light comes on.
When the door is open, the fan
automatically turns off temporarily to
save energy.
Using SuperFreeze and DynaCool
25
Содержание KFN 12823 SD ed
