Miele Honeycomb care Paragon sensor, Руководство по эксплуатации

Страница: 10 / 56

Features
Display
The display shows:
– the programme duration (time
remaining);
– the delay start time;
– check messages;
– programmable functions.
Estimated time remaining
When a programme is selected the
estimated duration (time remaining) will
appear in the display. Please be aware
that it is only an estimate!
The following factors all affect the
estimated time remaining: Residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this the
time displayed can alter during the
course of a programme.
In the same way, the Woollens hand
care and Smoothing programmes can
finish earlier than expected if a certain
temperature is reached. This can
happen with particularly fine fabrics,
very small loads or if items were partly
dry beforehand.
Buttons and check lights
The relevant indicator light comes on
each time a button is pressed.
PC / Optical interface
The indicator light marked PC can be
used by Miele Service technicians as
an optical interface to update your
machine in future years.
Electronic system lock
– Prevents the machine being used
without your knowledge.
Programmable functions
– For changing the default settings.
Drum lighting
If the dryer is switched on, the drum
lighting will come on when the door is
opened. It will go out after a short while
if the door is left open to save energy.
Guide to the machine
10