Operation
55
Switching Booster on or off for a
cooking programme
If you have selected the
Booster
|
On
setting, you can switch off the function
separately for a cooking programme.
On the other hand, you can also switch
on the function separately for a cooking
programme if you have selected the
Booster
|
Off
setting.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch off the
Booster
function for this cooking
programme.
Select the
sensor.
Select
Booster
|
Off
.
Confirm with
OK
.
The
Booster
function is switched off
during the heating-up phase. Only the
heating elements for the selected oven
function are used to pre-heat the oven
compartment.
Pre-heat
It is only necessary to pre-heat the oven
in a few instances.
You can place most dishes in the cold
oven compartment to make use of the
heat produced during the heating-up
phase.
If you have set a cooking duration, it
will only start to count down when the
target temperature is reached and you
have placed the food in the oven.
Start the cooking programme
immediately without delaying the start
time.
The
Pre-heat
function is not available
with the
Microwave
operating
mode.
Switching on the Pre-heat function
The
Pre-heat
function can be used with
any oven function and has to be
switched on separately for each
cooking programme.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch on the
Pre-heat
function for this cooking programme.
Select the
sensor.
Select
Pre-heat
|
On
.
Confirm with
OK
.
The following message is displayed
with a time:
Place food in oven at
... The
oven compartment is heated to the set
temperature.
As soon as you are prompted to do
so, place the food in the oven
compartment.
Confirm with
OK
.
Содержание H 7440 BMX
Страница 93: ...Installation INSTALLATION 93 Side view ...
Страница 106: ......
Страница 108: ...M Nr 11 195 920 09 en AU NZ H 7440 BMX ...