How to set the time or a
duration
Times are set in segments:
– For the time of day and cooking
durations, first the hours, then the
minutes.
– For the minute minder, first the
minutes, then the seconds.
^
Press OK.
Depending on the position of the
function selector, the functions (
N
,
T
,
S
or
+
) will appear.
^
Highlight the function required with
V
or
W
.
The appropriate symbol will flash for
about 15 seconds.
^
Press OK while the symbol is
flashing.
This selects the function and the left
numeric block will start to flash.
You can only set the time/duration
while the numeric block is flashing. If
you run out of time you will have to
select the function again.
^
Use
V
or
W
to enter the value
required.
^
Press OK.
The right numeric block will start to
flash.
^
Use
V
or
W
to enter the value
required.
^
Press OK.
The time/duration you have set is now
saved.
Displaying times/durations
If times/durations have been entered,
the
N
and
T
or
S
symbols will appear
to show that these have been set.
If you are using the minute minder
N
,
cooking duration
T
and end of
cooking time
S
functions
simultaneously, the last selected time
will be displayed.
If you have selected a cooking
duration, the time of day cannot be
displayed.
When the time/duration has elapsed
– the relevant symbol will flash,
– a buzzer will sound, if this option is
selected (see "Clock/timer - Altering
settings").
^
Press OK.
The buzzer will stop and the symbols in
the display will go out.
Clock/timer
37
