Technical Information
94
G 600/G 800
2. Press and hold the
Top solo
button while switching the appliance on at the on/off
switch. Release the
Top solo
button within 2 seconds.
3. The
On
LED lights up and the
Softener
LED flashes (if this is not the case,
repeat Steps 1 and 2).
4. Set the program selector switch to the desired function (see Table 6-20).
5. Press
Top solo
to toggle between the available options.
6. To save the option: Turn the program selector switch to
Stop
and switch the
appliance off.
Selector switch position Function
Programmable options Top solo LED
1 o’clock
Drying
Normal
1
Off
Drying Plus
On
2 o’clock
Water hardness
-
Off
2
3 o’clock
Temperature
reduction
None
1
Off
Reduction of 9°F
On
Table 6-20:
G 680, G 880 Programming Functions
1
Standard setting
2
Setting not possible; "without softener" is programmed. Modify in service mode 2 (see Section
6.8.4.3), then repeat Steps 1 and 2.
6.8.4.1.1
Setting the Water Hardness
1. Access programming mode.
2. Turn the program selector switch to the 2 o'clock position.
3. Press
the
Top solo
button.
4. Turn the program selector switch to the desired water hardness setting (see Table 6-21).
5. To save the setting, press
Top solo
, turn the program selector switch to
Stop
and switch
the appliance off.
Appliance width [cm] Water hardness
Program selector
switch position
(o’clock)
Water hardness
selector in
cabinet
45 (Slimline models)
1 - 5
1
6
6 - 7
2
6
8 3
6
9 4
6
10 - 11
5
6
12 - 14
6
6
15 - 16
7
6
17 - 21
8
6
22 - 24
9
6
25 - 31
10
6
32 - 35
11
3
36 - 47
11
4
48 - 64
11
5
65 11
6
