Miele F 2411 Vi страница 49 Скачать руководство пользователя | Manualshive

Страница: 49 / 120

background image

Installation

*INSTALLATION*

49

Mains water connection

Information about the mains water
connection



Risk of injury and appliance

damage if appliance is not
connected properly.
Failing to connect the appliance
properly can result in personal injury
and/or material damage.
The appliance may only be
connected to the mains water supply
by suitably qualified persons.



Disconnect the refrigeration

appliance from the power supply
before connecting it to the water
supply.
Close the stopcock before
connecting the refrigeration
appliance to the water supply.



Risk to health and risk of

damage due to contaminated water.
The quality of the incoming water
must conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
Connect the refrigeration appliance
to the drinking water supply.

This refrigeration appliance meets the
requirements of IEC 61770 and
EN 61770.

Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed. All
appliances and systems used to
supply water to the refrigeration
appliance must also comply with the
applicable regulations in the
respective country.

The water connection pressure needs
to be between 200 kPa and 800 kPa
(2 bar and 8 bar).



Risk of damage due to excessive

water pressure.
Excessive water pressure in the pipe
can cause damage to the
refrigeration appliance.
Install a pressure reducing valve if
the water pressure in the system
exceeds 800 kPa (8 bar).
Do not install the system if the water
pressure exceeds 830 kPa (8.3 bar).
Contact a plumbing specialist if you
are unsure of your water pressure.

Use fresh water to ensure that the
quality of the ice cubes remains high.
Connect the stainless steel hose to
the fresh water supply and avoid
connection to a water supply in
which the water might stagnate.

Only use the stainless steel hose
supplied. The stainless steel hose
must not be shortened, extended or
replaced by a different hose.

«
...
47
48
49
50
51
...
»

Содержание F 2411 Vi

























































































































Отзывы:

Нет отзывов

Похожие инструкции для F 2411 Vi

Бренд: Nelson Страницы: 6

Бренд: Saturn Страницы: 21

Бренд: BOMANN Страницы: 28

Бренд: ZANKER Страницы: 36

Бренд: John Lewis Страницы: 24

Бренд: Frigidaire Страницы: 11

216602400 (9712)

Бренд: Frigidaire Страницы: 12

Бренд: Frigidaire Страницы: 24

Бренд: Frigidaire Страницы: 34

Бренд: Frigidaire Страницы: 1

Бренд: Baumatic Страницы: 32

SILENTstar HD Rev2.0

Бренд: Watercool Страницы: 4

Бренд: Polar Refrigeration Страницы: 40

Бренд: Infiniton Страницы: 67

Бренд: ELECTRO FREEZE Страницы: 59

Бренд: ELECTRO FREEZE Страницы: 88

Бренд: Pkm Страницы: 47

U30456 ZFC 21 JC

Бренд: Zanussi Electrolux Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды