Miele F 2411 Vi Скачать руководство пользователя страница 85

Страница: 85 / 120

Temperature and door alarm

Switching the temperature alarm off
early

Before you switch the temperature
alarm off, you must determine the
cause and rectify it.

If the alarm disturbs you, it can be
turned off early.



Touch the

sensor.

The alarm will stop and the message
will disappear from the display.

Door alarm

An alarm will sound if the appliance
door has been left open for longer than
2 minutes.
The message

Close the door

will also

appear on the display.

As soon as the appliance door is
closed, the alarm tone will stop and the
message in the display will go out.

Switching the door alarm off early

If the alarm disturbs you, it can be
turned off early.



Touch the

sensor control.

The alarm will stop and the message
will disappear from the display.

After a certain time, the alarm will
sound again and the message will
reappear on the display until the
appliance door has been closed.

Содержание F 2411 Vi

























































































































Результаты поиска

Содержание F 2411 Vi

Отзывы:

Miele F 2411 Vi, Инструкции по эксплуатации и монтажу, Страница: 85 / 120

Результаты поиска

Содержание F 2411 Vi

Отзывы: