Miele F 2411 Vi, Инструкции по эксплуатации и монтажу, Страница: 88 / 120

Adjusting the interior fittings
88
Removing the dividing panel
(depending on the model)

Pull the freezer basket out as far as it
will go.

To release the holders, use a suitable
object to turn the slots in the pegs to
a horizontal position (1.).

Remove the pegs from the
holders (2.).
 Pull the dividing panel upwards to
remove it.
 To reinsert the dividing panel, place
the holders in an upright position and
position the dividing panel into the
holders so that you hear it click into
place.

Insert the pegs into the holders and
use a suitable object to turn the slots
in the pegs into a vertical position.
 Push the freezer basket all the way
back in.
Removing the ice cube
container

Open the appliance door as far as it
will go.
The opening angle of the appliance
door must not be limited to 90°
because otherwise the upper freezer
basket cannot be pulled out as far as
it will go.
 Pull the upper freezer basket out as
far as it will go.

Tilt the ice cube container

forwards and pull it up and out to
remove it.
Ice cube production does not stop
when the ice cube container has
been removed. Ice cubes can fall
into the freezer basket underneath.
Only remove the ice cube container
for the shortest time possible or
switch off the ice maker beforehand
(see “Switching off the ice maker” in
“Making ice cubes”).