Miele DO 7860, Инструкции по эксплуатации и монтажу

Страница: 12 / 156

Warning and Safety instructions
12

Any contact with live connections or tampering with the electrical
or mechanical components of the Dialog oven will endanger your
safety and may lead to appliance malfunctions.
Do not open the Dialog oven housing under any circumstances.

The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.

Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.

There are 2 seals around the door. These seals must never be
removed.

During installation, maintenance and repair work, the Dialog oven
must be completely disconnected from the mains electricity supply.
To ensure this:
– Switch off the mains circuit breaker, or
– remove the screw-out fuse (in countries where this is applicable), or
– switch off at the wall socket and withdraw the plug. To do this,
pull the plug and not the mains connection cable.

The Dialog oven requires a sufficient supply of cool air for efficient
operation. Make sure that the supply of cool air is not hindered in
any way (e.g. by heat insulation strips fitted in the housing unit).
Furthermore, the required supply of cool air must not be excessively
heated by other heat sources (e.g. solid fuel stoves).

If the Dialog oven is built in behind a furniture front (e.g. a door),
do not close the door while the Dialog oven is in use. Heat and
moisture can build up behind the closed furniture door. This can
result in damage to the Dialog oven, the housing unit and the floor.
Leave the furniture door open until the Dialog oven has cooled down
completely.