Midway Cruis'n Exotica, Руководство по эксплуатации

Страница: 98 / 109

Troubleshooting - 8
Linking Problem Troubleshooting,
continued
SYMPTOM CAUSE REQUIRED ACTION
Improper hub switch
setting 1. Assure switches on hub are set according to Hub
Link Kit instructions. (VGMs on a network do not
require couplers. Hub has electronic crossover.)
2. Inspect hub indicator lights for link activity. See
manufacturer’s literature for diagnostics.
Wrong software
version Verify all linked VGMs use same version of
software. Error message “VERSION
MISMATCH” will appear if you try to link different
versions. Contact your distributor.
Faulty wiring
(2 VGMs) 1. Insert only the supplied crossover connection
between coupled VGMs. Standard couplers
appear identical to devices supplied with games,
but do not include an internal crossover.
2. Verify each linking crossover coupler operates
properly by placing it in a working link between
two VGMs.
•
Some Video Game
Machines (VGMs) in group
link properly, while others do
not
Faulty wiring
(3 or more VGMs) 1. Use an additional crossover connector and cable
to extend game or hub link connection. Two
crossovers cancel each other out and results in
same problem as no link crossover.
2. Connect cables directly to hub. Do not use a
crossover coupler and hub together in single
network.
3. Separate communications wiring from other
wiring. Wires that must cross can only cross at
right angles to limit noise pickup.
CAUTION
Do not remove or install any connector when power is turned on. Installation under
power will damage the circuit boards or hard disk drive and void the warranty.