Midway Cruis'n Exotica, Руководство по эксплуатации

Страница: 29 / 109

Diagnostics - 11
Main Menu
Diagnostic Menu,
continued
Lamp Test
LAMP TEST
To detect intermittent or faulty incandescent bulbs, select Lamp Test at the Main Menu. This test ensures
that the incandescent bulbs critical to game operation function properly.
Use the Volume Up or Volume Down button to highlight Lamp Test and press the Test button. During the
test observe the selected lamp(s) switches turn on or off when the corresponding selection is made.
LAMP TEST
TURN ON ALL LAMPS
TURN OFF ALL LAMPS
TURN ON START
TURN ON VIEW 1
TURN ON VIEW 2
TURN ON VIEW 3
TURN ON MARQUEE LAMP 1
TURN ON MARQUEE LAMP 2
PRESS VOLUME UP/DOWN TO SELECT
PRESS TEST BUTTON TO ACTIVATE
PRESS SERVICE CREDIT BUTTON TO EXIT
NOTES ON THE LAMP TEST:
1. The RADIO button is not illuminated and requires no lamp test.
2. The MARQUEE LAMPS are located inside the lighted header as part of the Deluxe Linking Kit.
3. To override individual tests select either TURN ON or TURN OFF ALL LAMPS. The lamps also automatically
switch off when the SERVICE CREDIT button is pressed to exit this screen.
Press the Service Credit button to return to the Diagnostic Menu.
Main Menu
Diagnostic Menu,
continued
LED Test
LED TEST
To verify that the Dashboard LED’s function properly, select LED Test at the Main Menu. This test allows
you to control and test the illumination of the LED’s located on the dash PCB.
Use the Volume Up or Volume Down button to highlight the LED Test and press the Test button. This
test detects intermittent or faulty LED’s that are critical to game operation. Observe the following activity
on the dash PCB.
LED TEST
LEDS ON
LEDS OFF
LEDS CYCLE
PRESS VOLUME UP/DOWN TO SELECT
PRESS TEST BUTTON TO ACTIVATE
PRESS SERVICE CREDIT BUTTON TO EXIT
LED’s ON. This option simultaneously turns on all LED’s. LED’s remain illuminated until switched off.
LED’s OFF. This option simultaneously turns off all LED’s. LED’s will not be illuminated during this phase.
LED’s CYCLE. This option causes the LED’s to cycle sequentially turns LED’s on and off beginning with
those located on the far left-hand side of the dash PCB. To stop the cycle press the Service Credit button.