Midway Cruis'n Exotica, Руководство по эксплуатации

Страница: 22 / 109

Diagnostics - 4
Use the Volume Up or Volume Down button to highlight the Switch Test option and press the Test button
to access it. Press any switch on the control panel or coin door to cause the corresponding indicator on
the screen to illuminate. Each illuminated square represents one completed switch circuit.
Main Menu
Diagnostic Menu,
continued
Motion Test Menu
MOTION TEST
To verify functionality of motion seat controls, select MOTION TEST at the Main Menu.
Use the Volume Up or Volume Down button to highlight the Motion Test option and press the Test button
to access it. Use the Service Credit button at any time to exit the Motion Test and return to the Main
Menu.
MOTION TEST
HOME POSITION
TILT LEFT
TILT RIGHT
TILT FORWARD
TILT BACK
MULTIPLE COMMANDS
PRESS VOLUME UP/DOWN BUTTONS TO SELECT
PRESS SERVICE CREDIT BUTTON TO EXIT
HOME POSITION. The Home Position routine automatically centers the motion seat so that it is
positioned upright and does not tilt at any angle.
TILT LEFT. The Tilt Left routine automatically tilts the motion seat at a left leaning angle.
TILT RIGHT. The Tilt Right routine automatically tilts the motion seat at a right leaning angle.
TILT FORWARD. The Tilt Forward routine automatically tilts the motion seat at a forward leaning angle.
TILT BACK. The Tilt Back routine automatically tilts the motion seat at a backward leaning angle.
MULTIPLE COMMANDS. The Multiple Commands routine automatically cycles through and performs
each of the other routines. Press the Service Credit button to stop the cycle and return to the Motion Test
Menu
Main Menu
Diagnostic Menu,
continued
DIP Switch Test
DIP SWITCH TEST
To verify the functionality of both 8-position DIP switches on the CPU Board, select DIP SWITCH TEST at
the Main Menu. Observe immediate on-screen results by changing the setting on a switch.
Use the Volume Up or Volume Down button to highlight the DIP Switch Test option and press the Test
button to access it. The current settings appear on-screen. Consult the table on the next page to
determine if changes are required. The default switch positions are all OFF for standard operation.
A vertical bar next to the switch position column indicates a common switch function.