Midway Cruis'n Exotica, Руководство по эксплуатации

Страница: 8 / 109

Operation - 2
SAFETY INSTRUCTIONS
The following safety instructions apply to operators and service personnel. Read these instructions
before preparing the Video Game Machine (
VGM ) for play. Other safety instructions appear throughout
this manual.
DEFINITIONS OF SAFETY TERMS
♦
DANGER indicates an imminent hazard. If you fail to avoid this hazard, it WILL cause death or
serious injury.
♦
WARNING indicates a potential hazard. If you fail to avoid this hazard, it COULD cause death or
serious injury.
♦
CAUTION indicates a potential hazard. If you fail to avoid this hazard, it MAY cause minor or
moderate injury. CAUTION also alerts you about unsafe practices.
♦
NOTICE indicates information of special importance.
WARNING: TRANSPORTING VIDEO GAME MACHINES ( VGM ).
The VGM contains glass and fragile electronic components. Use appropriate care when
transporting. Avoid rough handling when moving the VGM. Do not move with the power switched
on.
WARNING: DISCONNECT POWER.
Always turn the power OFF and unplug the VGM before attempting service or adjustments unless
otherwise instructed. Installing or repairing boards with the power switched on can damage
components and void the warranty.
WARNING: GROUND GAMES .
Avoid electrical shocks! Do not plug in a VGM until you have inspected and properly grounded it.
Only plug into a grounded, three-wire outlet. Do not use a “cheater” plug, or cut off the ground pin
on the line cord.
WARNING: AVOID ELECTRICAL SHOCKS .
This VGM does not utilize an isolation transformer. Internal cabinet AC is not isolated from the
external AC line.
WARNING: HANDLE FLUORESCENT TUBE AND CRT WITH CARE.
If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight
feet or more from the implosion.
CAUTION: CHECK POWER SELECTOR, LAMP.
Set the 115/230VAC selector on the power supply for the correct line voltage. Check the selector
setting before switching on the VGM. Verify that the fluorescent lamp assembly is correct for the
local line voltage.
CAUTION: USE PROPER FUSE.
Avoid electrical shock! Replacement fuses must be identically rated. Fuse voltage and current
ratings must be identically rated to the original fuse.
CAUTION: ATTACH CONNECTORS PROPERLY.
Be sure board connectors mate properly. If connectors do not slip on easily, do not force them. A
reversed connector may damage the VGM and void the warranty. Connector keys only allow a
connector to fit one set of pins on a board.
CAUTION: USE CARE WHEN SHIPPING HARD DISKS.
The hard disk drive must be packed in an anti-static bag. When shipping the drive for repair or
replacement, pack it in an approved container (P/N 08-8068). Do not stack or drop hard disk
drives.