Midway Cruis'n Exotica, Руководство по эксплуатации

Страница: 60 / 109

Service - 16
To service the Power Supply…
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Unlock and remove the rear cabinet door.
Ø
Unplug the IEC AC connector from the rear of the supply and the DC connector from the front.
Ø
Remove the two front and two rear screws from the supply, then lift it off of the power chassis.
Note voltage setting.
Ø
Perform the desired repair or equipment replacement.
Ø
Be sure to set the voltage switch to the correct value prior to reinstallation.
Ø
Set the supply on the power chassis and align the mounting holes. Install the four screws and the
two power connectors.
To service the Transformer…
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Unlock and remove the rear door.
Ø
If the power to the Video Game Machine (VGM) was only recently disconnected, the transformer
may still be warm. Allow the transformer to cool completely before handling.
Ø
Label and disconnect all wiring, including ground.
Ø
Remove the screws used to fasten the transformer to the base of the cabinet.
Ø
Perform the desired repair or equipment replacement.
DANGER:
High voltage present. Exercise extreme caution while servicing transformer.
To service Fan Assembly…
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Unlock and remove the rear door.
Ø
Remove the perforated metal cover to expose the fan assembly and set aside.
Ø
Unplug the fan power connector from the wiring.
Ø
Remove the screws used to fasten a fan down and then lift fan out.
Ø
Perform the desired repair or equipment replacement.
To service Speakers in Head Rest…
Refer to the Seat Pedestal Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the tamper resistant screws from the speaker grille.
Ø
Remove the tamper resistant screws used to fasten the speaker plate to the seat and pull
forward.
Ø
Label and disconnect wires, including ground.
Ø
Remove the nuts used to fasten the speaker to the plate and remove speaker(s).
Ø
Perform desired repair or equipment replacement.
Ø
Reinstall the speaker(s) to the speaker plate and reattach wiring, including ground. Attach the
speaker plate to the seat.
Ø
Reinstall speaker grille and fasten in place with hardware provided.
To service Speaker in Seat Back…
Refer to the Seat Pedestal Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the tamper resistant screws used to fasten the grille to the seat and pull forward.
Ø
Label and disconnect wires, including ground.
Ø
Remove 4 Philips head screws used to fasten the speaker to the seat and remove speaker.
Ø
Perform desired repair or equipment replacement.
Ø
Reinstall speaker and reattach wiring, including ground.
Ø
Reinstall speaker grille and fasten in place with hardware provided.