Midway Cruis'n Exotica, Руководство по эксплуатации

Страница: 54 / 109

Service - 10
Dashboard PCB Service, continued
Ø
Perform the desired repair or equipment replacement.
Ø
Connect the ribbon and power cable to a Dashboard PCB. NOTE: The red stripe on the ribbon
cable must be lined up with pin 1 on the PCB, and the black wire on the power cable must line
up with pin 1 on the power connection for the Dashboard.
Ø
Reattach the PCB to the pod, and then fasten the pod to the dashboard.
Ø
Check for pinched wires.
Ø
Reinstall the Dashboard and fasten in place with the screws provided.
8-32 X 5/16 SCREW
SPECIAL
26 PIN RIBBON
CABLE
DASH LED
POWER CABLE
MOLDED CENTER
CONTROL POD
DASH PCB ASSEMBLY
OVAL PUSH BUTTON START
OVAL PUSH BUTTON
RADIO
Dash PCB Service
To service the Left or Right Control Pods…
Refer to the Control Pod, Buttons and Shifter Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the 4 tamper-resistant buttons used to fasten the faceplate.
Ø
Pull the plate forward enough to expose the switches.
Ø
Label and disconnect the wiring for the pod(s) being serviced.
Ø
Lift the buttons or shifter mechanism out of the pod and set aside.
Ø
Remove the 2 hex head screws used to fasten the pod to the dash, and then gently lift the pod
off the dashboard.
Ø
Perform the desired repair or equipment replacement.
Ø
Reinstall and fasten in place with the screws provided.
To service a Start or Radio Button…
Refer to the Control Pod, Buttons and Shifter Service illustration.
Ø
Switch off the power to the game machine and unplug the AC line cord.
Ø
Remove the Dashboard. Refer to service instructions for Dashboard.
Ø
Gently remove the bulb(s) from the socket using a rocking motion.
Ø
Perform the desired repair or equipment replacement. NOTE: If changing a bulb, simply reseat
it in original socket. If repairing a button, unscrew the ring at the base and remove the button.
Ø
Reinstall the Dashboard and fasten in place with the screws provided.