MIDWAY GAMES 40260, Руководство оператора

Страница: 13 / 64

S E RVI C I N G
Always turn off power to game before servicing.
•
MARQUEE G LASS
Remove the five 1 /4" hex-head wood screws that hold the marq uee retaining stri p to the top of
the cabi net. Remove the strip. Lift the marq uee g lass out of the top g rooves.
•
FLUORESCENT LIGHT · ASSEMBLY
Remove the marq uee retaining strip and the marq uee g lass. Disconnect the fluorescent light
assembly from its power cable. Loosen the screws fastening the assembly to the cabinet and
lift out the assembly.
WARNING
if
a
fiuorescent tube drops and it breaks, it will implode!
Use
care in handling.
•
FLUORESCENT LAMP
•
SEAT
Remove the marq uee retaining strip and the marq uee g lass. Remove the fluorescent lamp
retainer brackets . G rasp the tube, g ive it a q uarter turn and remove it from its socket. Carefu lly
place a new tube into the socket and turn to rei nsta l l .
Use t h e T 2 7 tamper proof wrench t o remove three screws from each s i d e o f t h e seat mou nting
plate . Lift the seat/mounting plate off the pedestal assem bly and place the seat on its back, on
a flat su rface. The six bolts u nder the mou nting plate can now be removed to replace the seat.
•
SEAT SLIDE ASSEMBLY
Use the T27 tamper proof wrench to remove three screws from each side of the seat mou nting
plate. Lift the seat/mounting plate off the pedestal assembly and set aside. Slide the seat
assem bly forward , and remove the two tamper proof torq ue screws from the wood panel on top
of the pedestal assembly. Slide the seat back and remove the two front torq ue screws. Lift the
wood panel out of the pedestal base and turn the u n it over. Remove the fou r n uts hold ing the
wood panel to the slide assembly. Place the wood panel aside and the slide assem bly can be
easily accessed .
•
SPEAKERS
NOTE: The speakers are magnetically shielded. Be sure any replacement speakers are also
magnetically shielded.
Upper (25" and
31"
cabinets, dual 5.25" full range):
Switch off power to the game. Remove
the marq uee and the marq uee glass. The speakers come out from the front of the cabinet. Be
sure to d isconnect the cabling and remove the n uts on the mounting screws before attempting
to remove the speakers from the enclosure. Carefu l ly, reinstall the seals u pon completing any
task in the speaker enclosure.
Lower (25" cabinet,
6"
woofer;
31"
cabinet, 8" woofer): One speaker is located near the
gas and brake pedals. Open the rear door. U nscrew the rack assembly and lay it down .
Reach through the cabinet and d isconnect the cabling. Remove the n uts on the mounting
screws and pull the speaker out of the cabinet. Carefu lly, rei nstall the seals when replacing the
speaker.
1- 5