MIDWAY GAMES 40260, Руководство оператора

Страница: 12 / 64

CABINEl MOUNTING HOLES
MOUNI INL RAILS
C:ABINEl 8A�E
F'[D[STAL MOUNTING
HOUS
Cl-NUTS)
6) The mounting rails for the pedestal assembly are sh ipped bolted to the inside the cabinet. U n bolt the
1 /4-20 hex-head bolts holding the rails, pull the rails forward and re-bolt them (see above d iag ram for
proper placement) . Do not tig hten bolts completely, some movement is req u i red in the mounting rails
to align ho!M with pedestal asMmb!y.
7) Place pedestal assem bly on mounting rails. Align the holes and carefu lly pull the pedestal away .
Hold mounting rails in position and tig hten bolts inside cabi net.
8) Attach pedestal assem bly and bolt together using eight 1 /4-20 tamper proof screws. Use the T27
wrench, included in the spare parts, to install these screws.
9) Remove rear door of cabi net. I nspect cabinet interior for any signs of damage. C heck all major
assemblies to ass u re that they are mou nted secu rely.
1 0) Refer to the game's Cabinet Wi ring Diag ram (section three), and check to see that all cable
con nectors are correctly secured. DO N OT FORCE CO N N ECTI O N S . Watch for damaged
con nectors and avoid making reversed con nections.
1 1 ) Determine the value of your line voltage with a meter. Check the fl uorescent lamp and power su pply
slide switch to be sure each corresponds to your line voltage.
1 2) Replace rear cabinet door and screw (lock) it secu rely. N OTI C E: Tamper proof screws are included
with the spare parts. These screws are optional and may be used to secure the rear door. The T20
wrench is used for the i nstallation of these screws. Close and lock the front coin and cash box doors.
1 3) To attach line cord , the four Phillips-head screws that mount the line cord cover plate to the rear
cabinet. Match the prongs on the plug with the holes i n the receptacle and push line cord securely
into place. Make sure cord aligns with the i ndentation of plate (indentation should point toward bottom
of cabinet) . Remount l i n e cord cover plate. If desired, tamper resistant screws are provided to
remount cover plate.
1 4) Connect the line cord to a g rou nded (3-terminal) AC wall outlet.
1 5) Switch O N the game using the O N/OFF switch located on the u pper left top of the cabinet, to verify
proper operation .
1-4