Midtronics EXP-802, Инструкция по эксплуатации

Страница: 5 / 28

Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527 www.midtronics.com
5
EXP-803 Chapter 1: Before You Begin
Safet y Reminder
For safe, efficient, and accurate testing, review the safety
and operating instructions in this manual before using the
analyzer. In addition, follow all manufacturers’ instructions and
BCI (Battery Council International) safety recommendations.
Personal Precautions
Inspect the battery for damages and check the electrolyte
level. If the electrolyte level is too low, replenish it and
fully charge the battery. Always use the necessary safety
precautions when working with batteries to prevent severe
injury or death. Follow all manufacturers’ instructions and
BCI (Battery Council International) safety recommendations,
which include the following precautions:

Battery acid is highly corrosive. If acid enters your eyes,
immediately flush them thoroughly with cold running
water for at least 15 minutes and seek medical attention.
If battery acid gets on your skin or clothing, wash imme-
diately with a mixture of water and baking soda.

Always wear proper safety glasses or face shield when
working with or around batteries.

Keep hair, hands, and clothing as well as the analyzer
cords and cables away from moving engine parts.

Remove any jewelry or watches before you start servicing
the battery.

Use caution when working with metallic tools to prevent
sparks or short circuits.

Never lean over a battery when testing, charging, or jump
starting.
Risk of explosive gases.
Never smoke or allow a spark or
flame in the vicinity of a battery.
Batteries can produce a highly explosive mix
of hydrogen gas and oxygen, even when the
battery is not in operation. Always work in a
well-ventilated area.
Wash hands after handling.
REQUIRED BY CALIFORNIA PROP. 65: Battery posts,
terminals, and related accessories contain lead and lead
compounds, chemicals known to the state of California
to cause cancer and birth defects or other reproductive
harm.
Chapter 1: Before You Begin
Conventions Used in This Manual
To help you learn how to use your Midtronics product, the manual uses these symbols and typographical conventions:
Convention Description
!
The safety symbol indicates instructions for avoiding hazardous conditions and personal injury.
The safety symbol with the words CAUTION , WARNING, or DANGER indicates instructions for
avoiding hazardous conditions and personal injury.
CAUTION
The word CAUTION indicates instructions for avoiding equipment damage.
The wrench symbol indicates procedural notes and helpful information.
UP ARROW
The text for keypad buttons are in BOLD capital letters.
CAPITAL LETTERS
The text for screen options are in regular capital letters.
BACK ARROW
The text for soft keys are in Bold capital letters.
Symbols And Typographical Conventions