Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
24
EXP-803
Chapter 9: Importing Data
The tester puts all test data into a file entitled user.csv, which
is saved and updated on the data card. This test data can then
be viewed and analyzed in a spreadsheet application such as
Microsoft Excel.
Importing The Data
1. Eject the data card from the tester.
2. Insert the card into a data card reader connected to your
PC.
3. Open your spreadsheet application and select File/Open.
4. In the Open dialog box, navigate to the data card in the
reader.
5. Click on the user.csv file to highlight it and select open.
Data Fields
Data for the following fields are included in the user.csv file.
These data fields will be displayed as the header row in your
spreadsheet application.
STORE ID#
Entered by user
TIME
Time of test
DATE
Date of test
LOCATION
Tested in-vehicle or out-of-vehicle
MEASURED CCA
Tested cold cranking amperage
RATED CCA
Inputted by user
MEASURED VOLTS
Tested measured voltage
RATED VOLTS
Entered by user
TEMPERATURE
Fahrenheit/Centigrade
AGE
Age of battery
BATTERY DECISION
Good/Bad/Charge/Recharge/
Replace/Marginal/24v
USER ID
User ID under which the test was
conducted
INPUT 1
Entered by user
INPUT 2
Entered by user
INPUT 3
Entered by user
STARTER VOLTS
Starter voltage measured when
tested
STARTER DECISION
Normal/Low Voltage/Charge/
Replace/No Start
CHARGE NL VOLTS
Tested no load voltage
CHARGE LD VOLTS
Tested with voltage load
CHARGE DECISION
No problems/No output/Low output/
High Output
SOFTWARE VERSION Tester software version
Chapter 9: Importing Data
Содержание EXP-802
Страница 2: ...blank page behind cover...