Midtronics EXP-1000 Heavy Duty, Инструкция по эксплуатации

Страница: 25 / 26

Midtronics B.V. Hoofdveste 6 - 8 Houten NL www.midtronics.com
EXP-1000 HD Chapter 13: Tester Internal Batteries
The tester uses 6 AA, 1.5-volt batteries (alkaline recommended)
to allow testing of batteries down to 1 volt and supply power
while the menu is active. The analyzer can test batteries down
to 5.5 volts when the internal batteries are not functioning.
Battery Power Indicator
The square in the upper left corner of the display indicates
the charge level of the battery pack. The square is black when
the battery pack is fully charged. It gradually changes to white
as the charge level declines. The tester will display a warning
message when the batteries need replacing.
Full Powered by
test battery
Decreasing Low
Power Level Indicator for AA Batteries
Replacing the Tester Batteries
1. Turn the tester face down.
2. Press gently on the ridges above the arrow on the bat-
tery compartment cover.
3. Slide the cover in the direction of the arrow and remove
the cover.
4. Remove the discharged batteries.
5. Insert new batteries as shown in the figure on the right
side. Make sure the positive and negative terminals are
positioned correctly.
6. Insert the door’s tabs into the slots on the analyzer and
slide the door closed, making sure the latch locks.
Battery Replacement
Latch Press here Slide in
this direction
Chapter 13: Tester Internal Batteries