Midtronics EXP-1000 Heavy Duty, Инструкция по эксплуатации

Страница: 12 / 26

Midtronics B.V. Hoofdveste 6 - 8 Houten NL www.midtronics.com
EXP-1000 HD Chapter 4: Battery Test
Battery Test Results
After the test the tester will display one of five battery
decisions with the complete results in a series of screens as
shown below. Use the
UP/DOWN ARROW
keys to scroll
through each result. To send the results to an IR printer, press
the
PRINT
soft key. To return to the Main Menu, press the
END
soft key,
or to continue testing if you’ve selected the system
text, press the
NEXT
soft key. You’ll have the opportunity to
print all the results at the end of the system test.
Battery decision
Measured voltage
Measured capacity
rating units
Rating units you
selected for the test
Temperature indication
Battery’s state of charge
General health of the battery
and its ability to deliver
its specified performance
compared with a new battery
Good Battery Result
Battery Decisions and Recommendations
Decision Recommended Action
GOOD BATTERY Return the battery to service.
GOOD–RECHARGE Fully charge the battery and return it to service.
CHARGE & RETEST Fully charge the battery and retest. Failure to fully charge the battery before retesting
may cause false readings. If CHARGE & RETEST appears again after you fully charge the
battery, replace the battery.
REPLACE BATTERY Replace the battery and retest. A REPLACE BATTERY result may also mean a poor
connection between the battery cables and the battery. After disconnecting the battery
cables, retest the battery using the out-of-vehicle test before replacing it.
BAD CELL–REPLACE Replace the battery and retest.
FROZEN BATTERY Thaw the battery and retest. Do NOT charge the battery!.
All battery, starting and Charging test results are
stored on the SD Card. This data can be copied from
the card and used to verify / compare results.