Midtronics EXP-1000 Heavy Duty, Инструкция по эксплуатации

Страница: 5 / 26

Midtronics B.V. Hoofdveste 6 - 8 Houten NL www.midtronics.com
EXP-1000 HD Chapter 2: Description
Chapter 2: Description
Connections and Data Ports
Data transmitter: sends test results to a PC
using an optional hardware and software kit.
Infrared temperature sensor with a range of
-28 °C to +93 °C
6-pin connector for the battery test cable.
Input for accessories. (optional)
Spring-loaded data card slot for test data
storage and software upgrades.
DB-9 connector for future expandability.
Removing and Inserting the Data Card
The analyzer ships with a storage card slot to protect it from
dust and debris. To remove the data card, push briefly on its
edge to release it and pull it from the slot. When inserting a
card, push it into the slot until it locks. The card is correctly
inserted when it is not protruding from the slot. To protect the
card slot and enable the analyzer to read and write to the card,
leave the card in the slot.
Connecting the Battery Test Cable
CAUTION: To prevent damage to the analyzer’s circuitry,
do not connect the analyzer to a voltage source greater than
30 Vdc.