■
Fully insert the appliance and centre it.
■
Do not kink the connecting cable.
■
Screw the appliance into place.
■
The gap between the worktop and the appliance must not be
closed by addtional battens.
• Do not hold or carry the appliance by the door handle. The door
handle cannot hold the weight of the appliance and may break off.
1. Carefully push the oven into the box, making sure that it is in the
centre.
2. Open the door and fasten the microwave with the screws that were
supplied.
I
* 20 mm for metal fascias
The appliance is designed to be permanently installed with a three-
pin power cord and may only be connected by a licensed expert in
accordance with the connection diagram.
Only a qualified electrician who takes the relevant regulations into
account may replace the power cord.
Do not use multiple plugs, power strips or extensions. Overloading
causes a risk of fire.
If the connection is no longer accessible following installation, an all-
pin isolating switch with a contact gap of at least 3 mm must be
provided.
MPORTANT INFORMATION
BUILDING IN
EN-10