INSTALLING HARDWIRED OUTPUTS
1) Remove the J-Box cover (6) and the knock-out cover
from the desired output (21 & 22). Remove the
conductors from the J-Box.
3) Splice conductors together using provided twist-on
wire connectors. (factory installed on circuit
wiring in the J-Box)
CAUTION: Use only twist-on connectors supplied with
UPS, or equivalent Listed twist-on connectors suitable for
output conductor connections
2) Insert cable connector (installer provided) while guiding
conductors to the J-Box opening. Slide on lock-nut and
and tighten on connector.
4) Carefully place spliced conductors back into the J-Box.
Reinstall J-Box cover.
Page 10
WIRING INSTALLATION MUST BE PERFORMED BY QUALIFIED PERSONNEL
UPS POWER MUST BE TURNED OFF, AND MAINS POWER MUST BE
DISCONNECTED PRIOR TO WIRING
WIRING TO OUTPUT CIRCUITS USING INSTALLER SUPPLIED #12AWG MINIMUM
#10AWG MAXIMUM CONDUCTORS.
