REAR PANEL DESCRIPTION CONTINUED
Critical Load Receptacle: Critical load receptacle, NEMA 5-20R.
21
Critical Load Output Connector Knock-Out: 125 VAC, 50/60 Hz, 16A. (Trade size ½”)
Non-Critical Load Output Connector Knock-Out: 125 VAC, 50/60 Hz, 16A. (Trade size ½”)
22 Hardwired Power Input: 3’ hardwired input cord. Remove the protective piece in the hole where the
hardwired input goes into the UPS. When wiring is complete, slide the snap-in connector (24) into the
knock-out until it is fully inserted. (See page 11 for hardwired input installation instructions)
23 Snap-in Connector: Slide the connector into the knock-out and secure in place. (Once the connector is
inserted into the knock-out, it cannot be removed)
20
19
22
23
Page 9
Expansion Port
E325394
6G48
Primary
Secondary
Serial Port
IN
OUT
125V
16A
60Hz
1650W
2150VA
Wiring Fault
Reset
EPO
D
A
T
A
Non-Critical Load
125VAC
60Hz - 16A
Reset
Circuit 1 Non-Critical Load
Reset
Critical Load
125VAC
60Hz - 16A
WIRE COLOR AND FUNCTION
LINE
BLACK
HARDWIRED
POWER INPUT
GROUND
GREEN
NEUTRAL
WHITE
Input:
48V
