SETUP OF UPS-IPCARD CONTINUED
Page 13
4) Select the SNMP card you are setting up. Click on the Tools menu and select “Device Setup” or double
click the SNMP card you want to configure.
5) You can modify the IP Address, Subnet Mask, and Gateway address for the Device MAC Address
listed in the Device Network Settings window, as shown in (FIGURE B). The default IP Address is
192.168.20.177, the default Subnet Mask is 255.255.255.0.
(FIGURE B)
(FIGURE C)
(FIGURE D)
6) Modify the IP, subnet mask or gateway address. Enter the new addresses into the corresponding fields.
7) You will need to enter a password for the SNMP card in the authentication window as shown in
(FIGURE C). Default user name: admin. Default password: admin.
admin
8) If the IP address is successfully set, you will see a message that the IP setup is okay. (FIGURE D)
