Midas HERITAGE 4000, Руководство оператора

Страница: 53 / 78

!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
If the scene already exists then the display will read over_str and you will need to press the confirm
button. The screen will then read done.
Pressing the MIDI button places you in the MIDI menu.
Using the UP and DOWN buttons scroll through OUT01 to 04 until the required message is reached.
(On the Heritage there are a maximum of 4 MIDI out messages that can be sent per recalled scene).
Press CONFIRM.
Using the UP and DOWN buttons scroll through the menu until the screen reads PROG. Press the
CONFIRM button
The display will read CH00, using the UP and DOWN keys a channel between 01 to 16 can be selected.
Press CONFIRM.
The display will read P000. Using the UP and DOWN keys, a program change between 00 and 127 can
be selected. Press confirm and you will be dropped back to the first level of the menu. When the
desired messages have been edited press the MIDI button again to drop out of the menu.
To then store the MIDI information with the scene the STORE button must be pressed followed by
CONFIRM
Once a scene has been stored press the STORE button so that the display reads OVER/STOR.
Press the UP key until the display reads PRCH then press CONFIRM.
Using the UP or DOWN key chose the required MIDI program change you wish the scene to be recalled
by. You have the choices NONE, Program Changes 000-127.
Once you have created the scene you wish to insert edit the act/scene number display using the
ACT/SCENE, UP and DOWN buttons until the desired position is displayed.
Press the INSERT key. The display will then read . The original scene and any scene preceding it
will then be incremented by one position.
NB The INSERT button will only be illuminated if a scene exists where you wish to place the scene,
otherwise STORE may be used as normal.
Recall the scene you wish to copy by selecting the scene number and pressing the NOW button.
Press the COPY button.
The MIDI Button will be illuminated as default which indicates that the midi out messages will also be
copied with the scene. If you do not wish the midi out information to be copied to the new scene press
the MIDI button so that the light is extinguished.
The act/scene numbers can now be scrolled through using the ACT/SCENE,UP and DOWN buttons until
the desired position is reached, then press the STORE button.
Recall the scene you wish to copy by selecting the scene number and pressing the NOW button.
Press the STORE button, and using the UP and DOWN buttons scroll through the display until XFADE is
shown, press CONFIRM.
The current cross fade speed stored with the screen will be displayed. Using the UP and DOWN buttons
select the required cross fade speed.
Press CONFIRM to store this new speed with the scene.
NB When a scene with a cross fade speed is being recalled the display will flash for the specified cross
fade time
Editing Midi (Program Change):
Assignment of Program changes to a Scene:
Inserting Scenes:
Copying Scenes:
Editing the Cross fade Value of a Scene:
done
Automation and Linking Automation and Linking
Operators Manual
- Page 48