Midas HERITAGE 4000, Руководство оператора

Страница: 41 / 78

Monitor Module Monitor Module
monitor
modul
e
MIDAS XL031
+21+
+18+
+15+
+12+
+9+
+6+
+3+
0
-3-
-6-
-9-
-12-
-15-
-18-
-21-
-24-
-27-
-30-
-33-
-36-
monitor
add mode
phones
0
+10
MUTE
SOLO
SOLO
level
masters
input
level
pre fade
(pfl)
TALK
to all
internal
PRE
meter
change
over
10
10
5
5
0
20
30
40
dB
10
10
5
5
0
20
30
40
dB
mute mute
solo clear
PAD ON
R L
l-r reverse
left only
-20dB
sum
O MONO
output ‘b’
output ‘b’
mono output
mono source
TALK
SOLO
MONO
SOLO
MONO
ST
C/O
C/O
EXT
stereo output
stereo source
0
+10
0
+10
mute
100
1k
freq
10k
level
0
1kHz
PINK
generator
internal
generator
external
signal
generator
+10
300
level
mic gain
talk mic
talk
internal
talk
external
+10 +20 +60
+40 0
Mono source
Mono output
Stereo output
Talk (input)
Level
Mono (masters)
Solo
C/O (output ‘b’)
Mute
Phones
Mute
ST
EXT
MONO
SOLO
C/O (output ‘b’)
- The talk input switch connects the external talk input to the local mono monitor
output.
- The level of the external talk inputs is continuously variable from off (-inf) to +10dB.
- The Mono (masters) switch routes the post fader mono master mix to the
local mono monitor output.
- The Solo switch routes solo signals to the local output whenever a solo is active on the
console. This overrides any signals sent from the mono buss but does not override talk inputs.
- The mono output ‘b’ C/O switch disconnects the mono local monitor output
from the main ‘a’ output and reconnects it to the secondary ‘b’ output.
- The mono output mute switch toggles the mono output mute. When lit, the local mono
monitor output is muted.
- The headphone output level control gives continuous adjustment of the headphone
level from off (-inf) to +10dB.
- When depressed, the headphone output is muted.
- When depressed, the post fader master stereo ouputs are routed to the local stereo
monitor outputs.
- When depressed, the external stereo input (2 track, etc...) is routed to the stereo local
monitor outputs.
- The mono master switch routes the post fader master mono buss to the stereo local
monitor outputs.
- The solo switch routes the solo buss signal to the stereo local monitor outputs when
ever a solo is in place on the console overriding signals sent from the stereo master, mono
master or any external input.
- The stereo output C/O switch disconnects the local stereo ‘a’ outputs and
connects the secondary ‘b’ local stereo monitor outputs.
Phones
Ø (left only)
Mono (sum)
ON (l-r reverse)
PAD (-20dB)
L
R
- The stereo output left only phase switch causes the phase of the left output of
the local stereo monitors to be inverted.
- The mono sum switch adds the left and right monitor signals with a 4.5dB
summing loss.
- When depressed, the left hand monitor signal is routed to the right hand
outputs and the right hand monitor signal is routed to the left hand output.
- When depressed, the three local monitor outputs are attenuated bu 20dB. 20dB
attenuation is also provided when talk inputs are enabled to help prevent feedback.
- The LEFT switch routes the left hand signal to both left and right local monitor outputs.
- The RIGHT switch routes the right hand signal to both left and right local monitor outputs.
SOLO MONO
ST EXT
stereo source
level
masters
input
level
mono source
TALK
SOLO
MONO
0
+10
0
+10
output ‘b’
mono output
C/O
mute
phones
0
+10
MUTE
PAD ON
R
L
l-r reverse
left only
-20dB
sum
O MONO
output ‘b’
C/O
stereo output
Operators Manual
- Page 36
Stereo source