Midas HERITAGE 4000, Руководство оператора

Страница: 30 / 78

Group Module Group Module
Group Outputs Group Outputs
The Heritage 4000’s assignable buss (group) outputs are located together on the rear of the console main body.
Pairs of group outputs and their corresponding insert points and direct input are located together
The group insert point is provided by two balanced TRS quarter-inch jack sockets, one send and one return per
output. The top insert point on the console will insert into the odd numbered output while the lower insert point
will insert into the even numbered output.
The output from the group is provided by a balanced male XLR socket. Again the top socket is used for the odd
numbered output while the lower socket is used for the even number output.
The direct input is connected to the group by a single balanced female XLR socket. Again the top socket is used for
the odd numbered group output while the lower socket is used for the even numbered group output.
In total the Heritage 4000 has 24 group outputs, direct inputs and group inserts.
The group module controls the signals sent to the assignable buss from the input channels.
- The LED bargraph meter shows the peak POST-Fader group output.
- An important feature of the Heritage 4000 is the flexible buss routing. This is
achieved by using the buss mode select switch at the top of the group module strip.
The configuration of the buss is set by pressing the switch which will cycle the buss mode through
three possible options:
- Stereo Aux
- Mono Aux
- Sub-group Output
The console will cycle through these three options indefinitely each time
the switch is pressed, . This allows the console to be reconfigured quickly
and with ease.
- The direct input level is continuously variable from off (-inf) to +10dB. The direct
input signal is summed with the group signal allowing for effects returns or the combination of
a number of consoles. A direct input is provided for both the odd and even numbered group.
- When depressed, the direct input is applied to the group signal pre-insert.
Otherwise, the direct signal is applies post-insert.
- When depressed, the direct input signal is muted from the group at all points.
- When depressed, the direct input signal is sent to the mono PFL and stereo AFL master
busses. The behaviour of the solo switch follows the solo behaviour of the rest of the console.
If in solo ADD mode, all input channels will take priority over this solo.
The H4000 has 8 mono matrix outputs. 8 matrix output sends are provided on each group
module for both the odd and even numbered outputs. The matrix send level is continuously
variable from off (-inf) to +6dB.
- When enabled, the matrix sends are sourced from the group signal PRE-fader.
Otherwise, the signal is sent from the group module POST the group output fader.
- When enabled, the matrix sends are sourced from the group signal before it is
applied to the insert point (pre-insert). Otherwise, the signal is sourced after the insert return
(post-insert).
LED Bargraph Meter
Buss Mode Select
Green
Red
Off
Level
Pre (insert)
Mute
Solo
Pre (fader)
Pre (insert)
Group Direct Inputs
MATRIX Sends
0 0
+6 +6
8 8
fader fader
insert insert
matrix
PRE PRE
PRE PRE
0
0
+10
+10
level level
insert insert
direct inputs
MUTE
SOLO
PRE
MUTE
SOLO
PRE
green = stereo aux
red = mono aux
+21+
+18+
+15+
+12+
+9+
+6+
+3+
0
-3-
-6-
-9-
-12-
-15-
-18-
-21-
-24-
-27-
-30-
-33-
-36-
l r
group
modul
e
MIDAS HS0011
mute mute
split
solo solo
group
0
0
0
0
0
0
0
0
0
0
0
0
0
0
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
+6
1 1
2 2
3 3
4
5
6
7
4
5
6
7
10
10
5
5
0
20
30
40
SOLO
SAFE SAFE
INS INS
TALK TALK
vca
9 9
10 10
l l
c c
r r
pan pan
to masters
MONO
ST
MONO
ST
0 0
+6 +6
8 8
fader fader
insert insert
matrix
PRE PRE
PRE PRE
0 0
+10 +10
level level
insert insert
direct inputs
MUTE
SOLO
PRE
MUTE
SOLO
PRE
green = stereo aux
red = mono aux
+21+
+18+
+15+
+12+
+9+
+6+
+3+
0
-3-
-6-
-9-
-12-
-15-
-18-
-21-
-24-
-27-
-30-
-33-
-36-
l r
Return
Return
Send
Send
IN
OUT
IN
OUT
1
1
2
2
group
outputs
Operators Manual
- Page 25