Midas HERITAGE 4000, Руководство оператора

Страница: 46 / 78

The lower 6 keys are used to navigate or load the scene and act memories.
The act/scene changeover key switches between act or scene mode. The current mode
is indicated under the numeric display.
The up and down keys allow the user to scroll through the scene or act memories on the
console and navigate through menus. The numeric display shows the number of the
memory but note that using the up/down keys does not load the memory.
Please note the function of ‘dots’ on the numeric display (as shown on page38).
The last, now and next allow quick the recall of memories.
- Recalls the snapshot memory indicated on the numerical display.
- Recalls the snapshot memory that numerically precedes the snapshot memory
that is currently active or stored.
- Recalls the snapshot memory that numerically proceeds the snapshot memory
that is currently active or stored.
Act/Scene C/O
Up/Down
Last/Now/Next
Now
Last
Next
Snapshot automation
automation
system
check confirm
delete copy insert
cancel
store midi
system
up
now
down
next
c/o
act/scene
last
act scene
automation
system
check confirm
delete copy insert
cancel
store midi
system
up
now
down
next
c/o
act/scene
last
act scene
Snapshots of the consoles automation controls can be stored as SCENES or as ACTS.
Essentially, there is no difference between an act and a scene memory except the way in
which they are numbered.
As in a play or script, scenes are subsets within an act.
STORE
INSERT
COPY
DELETE
CHECK
Pressing the store key will store the current console assignments and settings to the
snapshot memory (as indicated on the numeric display).
NOTE: To prevent overwriting snapshot memories, the console can be locked. See later
in this section.
The insert key allows the operator to insert a snapshot memory (at the number
indicated on the numeric display). All snapshot memories in the same scene after this
point will be re-numbered (incremented by one).
The copy function allows the snapshot (indicated on the numeric display) to be copied to
a temporary memory location. This can then be stored or inserted in the normal manner
OR a fast scene number can be assigned to the scene by pressing the desired fast scene
key.
The delete key will delete the contents of the scene indicated on the numeric display.
The check key can be used to preview the contents of a scene memory without actually
recalling the memory.
Mute settings will be shown in the SAFE switches so that the actual channel mutes are
not obscured. Whilst in this mode, the act/scene changeover and the up/down switches
can be used to step through the memories on the console.
Operators Manual
- Page 41
Automation