Routine Operation
3-58
DVC4000
Operator’s Guide/Tech Ref Manual
14.
Press the Up or Down arrow keys, as required, to
select the
Aud A:
option and observe the cursor
changes to a
*
cursor.
See Figure 3-161
Figure 3-161: MPEG Decoder Menu - Typical
15.
Observe the Preset Audio A status.
16.
Press the
ESC
key and observe the Main Screen
menu is displayed.
3.6.15
Monitor/Change Audio A Attenuation Level
To monitor or change Audio A channel attenuation level, perform
the following steps for each Preset, as required:
Note
In order to monitor/change the Audio A attenuation
level when performing the following steps, the
DVC4000-D must be powered up and must have
video stream inputs into the rear panel
ASI IN
connector.
1.
Verify the DVC4000-D is powered up.
2.
Verify the Main Screen menu is displayed.
See
Figure 3-162
. If the Main Screen is not displayed,
press the
ESC
key repeatedly until the Main Screen is
displayed.
MPEG Decoder
Audio Out: Ana
Attn: X.X dB
* Aud A: Stereo
Figure 3-162: Main Screen Menu
3.
Press the Down arrow key, as required, to move the
>>
cursor to the
System Menu
option.
4.
Press the
SEL
key or Right arrow key and observe the
System
Menu
is displayed.
See Figure 3-163
.
Figure 3-163: System Menu - Typical
5.
Press the Up or Down arrow key, as required, to move
the
>>
cursor to the
Preset Menu
option.
6.
Press the
SEL
key or Right arrow key to select the
Preset Menu
option.
Note
“
X
” indicated in the
Preset Menu
in the following
steps represents Presets
1
thru
9
. “
Preset #X
”
represents the Preset name.
7.
Observe the
Preset Menu
is displayed.
See Figure 3-
164 on page 3-59
.
DVC4000D
>> MPEG Decoder
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
Содержание DVC 4000
Страница 2: ......
Страница 18: ...Product Description 2 6 DVC4000 Operator s Guide Tech Ref Manual This page intentionally left blank ...
Страница 102: ...Routine Operation 3 84 DVC4000 Operator s Guide Tech Ref Manual This page intentionally left blank ...
Страница 122: ...Index 4 DVC4000 Operator s Guide This page intentionally left blank ...