Microwave Radio DVC 4000, Руководство оператора, Страница: 34 / 122

Routine Operation 3-16 DVC4000 Operator’s Guide/Tech Ref Manual
2. Verify the Main Screen ( Figure 3-25 ) is displayed. If
the Main Screen is not displayed, press the ESC key
repeatedly until the Main Screen is displayed.
Figure 3-25: Main Screen Menu
3. Press the Down arrow key, as required, to move the
>> cursor to the System Menu option.
4. Press the SEL key or Right arrow key and observe the
System Menu is displayed. See Figure 3-26 .
Figure 3-26: System Menu - Typical
5. Press the Up or Down arrow key, as required, to move
the
>> cursor to the Preset Menu option.
6. Press the SEL key or Right arrow key to select the
Preset Menu option.
Note “# X ” indicated in the Preset Menu in the following
steps represents Presets 1 thru 9 . “ Preset #X ”
represents the Preset name.
7. Observe the Preset Menu ( Figure 3-27 ) is displayed.
DVC4000E
>> MPEG Encoder
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
Figure 3-27: Preset Menu
8. Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset option. Observe
the cursor changes to a > cursor.
9. Press the SEL key or Right arrow key and observe the
Recall Preset option changes to #X:Preset #X , as
shown in Figure 3-28 , and the > cursor changes to a
! cursor.
Figure 3-28: Recall Preset Option
10. Press the Up, Down, Left, or Right arrow keys to select
Preset
1 thru 9 , as required, and press the SEL key.
11. Press the ESC key, as required, until the Main Screen
is displayed.
12. Press the Up arrow key to move the >> cursor to the
MPEG Encoder option.
13. Press the SEL key or Right arrow key and observe the
MPEG Encoder menu ( Figure 3-29 on page 3-17 ) is
displayed.
Preset Menu
* #X:Preset #X
Save Settings
Recall Preset
Preset Menu
Save Settings
! #X:Preset #X