Microwave Radio DVC 4000, Руководство оператора

Страница: 49 / 122

Routine Operation 3-31 DVC4000 Operator’s Guide/Tech Ref Manual
3.5.14 Save Preset Settings
The procedure required to save Preset settings is contained in
the following steps.
1. Verify the DVC4000-E is powered up.
2. Verify the Main Screen ( Figure 3-72 ) is displayed. If
the Main Screen is not displayed, press the ESC key
repeatedly until the Main Screen is displayed.
Figure 3-72: Main Screen Menu
3. Press the Down arrow key, as required, to move the
>> cursor to the System Menu option.
4. Press the SEL key or Right arrow key and observe the
System Menu is displayed. See Figure 3-73 .
Figure 3-73: System Menu - Typical
5. Press the Up or Down arrow key, as required, to move
the
>> cursor to the Preset Menu option.
6. Press the SEL key or Right arrow key to select the
Preset Menu option.
DVC4000E
>> MPEG Encoder
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
Note “ X ” indicated in the Preset Menu in the following
steps represents Presets 1 thru 9 . “ Preset #X ”
represents the Preset name.
7. Observe the Preset Menu ( Figure 3-74 ) is displayed.
Figure 3-74: Preset Menu
8. Press the Up or Down arrow keys, as required, to
move the cursor to the
Save Settings option and
observe the cursor changes to a > cursor. See
Figure 3-75 .
Figure 3-75: Recall Preset Option
9. Press the SEL key or Right arrow key and observe the
Save Settings option changes to #X:Preset #X and
the > cursor changes to a ! cursor.
10. Press the Up, Down, Left, or Right arrow keys to select
Preset
1 thru 9 , as required, and press the SEL key.
Preset Menu
* #X:Preset #X
Save Settings
Recall Preset
Preset Menu
#X:Preset #X
> Save Settings
Recall Preset