Microtronics myDatalog4, Руководство пользователя, Страница: 32 / 145

6.3 Storage
The following storage conditions must be observed:
myDatalog4 Storage temperature -20...+70°C
Humidity 15...90%rHnon-condensing
BP457 battery Operating temperature -20...+50°C
Storage temperature 0...+30°C
AP424D rechargeable battery Operating temperature -20...+50°C
Charging temperature 0 ...+40°C
Storage temperature 0...+35°C
Humidity 15...90%rH
Note: The table above contains only the storage conditions for the two energy sources used most frequently for the
myDatalog4 . Please consult the appropriate factsheet for information about the storage conditions of other
rechargeable battery or battery packs.
Important note: The storage conditions listed in the table only apply when the myDatalog4 is
disconnected from the rechargeable battery or battery pack. If the device has not been dis-
connected from the rechargeable battery or battery pack, the same conditions apply for stor-
age as for operation.
Store the measurement technology so that it is protected against corrosive or organic solvent
vapours, radioactive emissions as well as strong electromagnetic radiation.
6.4 Transportation
The myDatalog4 is designed for rough industrial applications. Nevertheless, it should not be sub-
jected to heavy shocks, bumps, impacts or vibrations. The original packaging must always be used
for transport.
6.5 Return
Every return must be accompanied by a fully field-out return form. This return form is available in
the service area of the myDatanet-Server. An RMA number is mandatory for any returns and can be
obtained from the Support & Service Centre (see "Contact information" on page 145). The return
shipment of the myDatalog4 must occur in the original packaging and with freight and insurance
paid to Microtronics Engineering GmbH (see "Contact information" on page 145). Insufficiently
cleared return shipments will otherwise not be accepted!
32 Rev. 01