Microtronics myDatalog4, Руководство пользователя, Страница: 132 / 145

Log entry Parameter
Description
Code Plain text Code Plain text
1250 MODEM TO ON 1 --- Timeout when trying to initialise the GPRS
modem
2 --- Timeout during the second attempt to
initialise the GPRS modem
1251 MODEM TO INIT --- --- Timeout when changing the GPRS modem
from the "Not initialised" to the "Not
connected" status
1252 MODEM TO CON --- --- Timeout when changing the GPRS modem
from the "Not connected" to the
"Connected" status
1253 MODEM TO DISC --- --- Timeout in the "Connected" GPRS modem
status
1254 MODEM TO OFF --- --- Timeout while waiting for the GPRS modem
to switch off
1260 MODEM FW ERROR ## Modem error during the firmware download
(see "Modem error" on page 134)
1261 MODEM FW TO --- --- Timeout during the firmware download
1271 MODEM RST OK --- --- Modem reset was completed successfully.
1272 MODEM RST NOT
OK
--- --- Modem reset was not completed
successfully. PowerOFF/PowerON modem
cycle required.
1280 MODEM UNKNOWN
TASK STATE
--- --- Internal system error
There may be a hardware problem if this
error is contained in the device log. Contact
the manufacturer in this case (see "Contact
information" on page 145).
1290 COM UNKNOWN
TASK STATE
--- --- Internal system error
There may be a hardware problem if this
error is contained in the device log. Contact
the manufacturer in this case (see "Contact
information" on page 145).
1400 MEASURE
UNKNOWN MODE
--- ---
1401 MEASURE
UNKNOWN STATE
--- ---
1402 MEASURE TO --- --- Timeout when generating the measurement
value
132 Rev. 01